Ceramic tiles are widely used in many homes in Florida. Because of its affordability and durability, many homeowners prefer ceramic tiles rather than other flooring types. It is an effective alternative to marble and porcelain tiles that are far more expensive.
Although ceramic tiles usually require professional installation. Determined homeowners can install ceramic tiles on their own. In installing tile floorings, be sure to have the following materials: chalk line, hammer, level, saber saw, rubber gloves, mastic, edging cap, sealants and grouts.
Before installing your ceramic tiles, make sure that you have a backer board. The surface where you are about to glue your tiles should be durable. Many tile specialists recommend using a cement board because of its hardness. Greenboard sheetrock can also be used as an alternative to cement boards. Nevertheless, greenboard sheetrock is not advisable for walls and shower and tub stalls because it is prone to moisture.
For aligned installation of a ceramic tile, Tampa tile specialists recommend that homeowners try a dry run of the tile layout. Tiles can be laid first without using adhesives so that homeowners can determine if the tiles fit perfectly on the floor. Homeowners can use a chalk line and a square to mark the floor with guidelines. Tile specialists also recommend that you start lay outing your tiles on the center of the room to have equal sides and edges.
Right after marking guidelines, its time for you to apply cement for your tile. Tampa tile specialists believe that tile cement dries after about 15 minutes. Once they feel tacky, they are ready for tile installation. For tiles to stick in, tile specialists recommend that you use a staircase technique in laying your tiles. Avoid sliding your tiles in position. It should be applied firmly on the cement.
Once youre done laying your tiles. Its time for you to put some grout between tiles. It is recommended that you use grouts with darker shades for ceramic tile. Tampa tile dealers believe that proper installation of grouts add up to the effect and appearance of the tile flooring. Remember to wet the tiles before putting on grouts so that the tiles will remain moist. Remember to remove excess grouts and let them dry overnight. There you have it, new and refurbished home flooring.
For More Information, please visit our website at www.bobscarpet.com.